Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA5505 + PoE

Has anyone come across any documentation

describing how much power is available via

the two PoE enabled ports on the ASA 5505?

The only documentation I can find just talks

to the ASA 5505 having two PoE ports with

little to no additional details about this

feature; details like the available wattage to

these ports, if they support both 802.1af

and/or Cisco pre-standard IP handsets, etc.

Thanks

2 REPLIES

Re: ASA5505 + PoE

Even though no specific technical fact on ASA5505's PoE is available, Cisco has made the PoE power rating standard for all PoE-supported products.

The PoE statement on the ASA5505:

The Cisco ASA 5505 provides two Power over Ethernet (PoE) ports, enabling simplified deployment of Cisco IP phones with zero-touch secure voice over IP (VoIP) capabilities, and deployment of external wireless access points for extended network mobility.

This means the PoE will be used to support IP Phone and wireless AP.

Based on Cisco standard, the PoE is supplying 48VDC.

Refer to IPTel PoE requirements and Wireless for example:

- http://www.cisco.com/en/US/partner/products/hw/switches/ps5528/products_white_paper09186a008026641c.shtml

- http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_tech_note09186a00800946e7.shtml#AP1200

HTH

AK

New Member

ASA5505 + PoE

http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/5505guide/overview.html

About half way down the page under figure 1-2. "Ports 6 and 7 are 15-Watt output PoE ports

..."

9046
Views
0
Helpful
2
Replies
CreatePlease login to create content