I have an ASA5510 and I am trying to set up a DMZ. Right now I am trying to have inside clients ping a host on DMZ it but with no luck. Any ideas? Here is the config:
interface Ethernet0/0
description OUTSIDE
nameif outside
security-level 0
ip address dhcp setroute
!
interface Ethernet0/1
description INSIDE
nameif inside
security-level 100
ip address 10.10.10.1 255.255.255.0
!
interface Ethernet0/2
description DMZ
nameif dmz
security-level 10
ip address 10.10.5.1 255.255.255.0
!
access-list DMZ extended permit icmp any any
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,dmz) 10.10.10.0 10.10.10.0 netmask 255.255.255.0
access-group DMZ in interface dmz