ASA5520 - Remote Access VPN using 1 interface back to FW
I have a 5520 configured with 1 interface on a DMZ network. The management interface is connected to the internal network. Could someone tell me where I can find a write-up on cisco.com that explains how to configure VPN remote access. I am running into IPSEC Spoofing issues since this traffic is running in/out of the same interface. Thanks!
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...