ASA5540: Single Interface for both http and IPSec traffic

[IT_Data_CorporateNet]

I'm configuring ASA5540, I want to use only one interface (outside) to connect to the internet i.e. to pass http traffic and ipsec tunnels. I can connect to the internet ok but the problem is with IPSec, i cannot establish Remote Access connection to the same interface. No logs are logged that means vpn traffic is not reaching my interface, what could be the problem?

[JORGE RODRIGUEZ]

It could be anything, one would have to see your ASA RA configuration, I would suggest to go over this link which provides basic ASA VPN server configuration and compare most likely your config is missing something.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

If you still have problems can you post sanatized config.

Rgds

Jorge