ASA5540: Single Interface for both http and IPSec traffic
I'm configuring ASA5540, I want to use only one interface (outside) to connect to the internet i.e. to pass http traffic and ipsec tunnels. I can connect to the internet ok but the problem is with IPSec, i cannot establish Remote Access connection to the same interface. No logs are logged that means vpn traffic is not reaching my interface, what could be the problem?
Re: ASA5540: Single Interface for both http and IPSec traffic
It could be anything, one would have to see your ASA RA configuration, I would suggest to go over this link which provides basic ASA VPN server configuration and compare most likely your config is missing something.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...