cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
251
Views
0
Helpful
1
Replies

ASDM 5.0.5 not loaded with ASA 7.0.5

croue
Level 1
Level 1

Hi,

A have an ASA5520, which was running with the image: asa704-4-k8.bin and the ADSM: asdm504-2.bin

I upgraded the image in 7.0.5, and the ADSM in 5.0.5

The ASA boots correctly with this new version 7.0.5, but still boot with the ADSM asdm504-2.bin and not the asdm505.bin

In the configuration, I have the next boot variable:

boot system disk0:/asa705-k8.bin

boot system disk0:/asdm505.bin

So, I'd like to know why the ASA 5520 doesn't accept the ADSM file at boot.

P.S: the ADSM file size in the flash is: 5823304

1 Reply 1

a.kiprawih
Level 7
Level 7

Hi,

Can you check how many asdm image you have in your flash? Use sh flash or dir command.

You can also specify the asdm image to be used using "pixfirewall(config)#asdm image flash:asdm-501.bin" command

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml#t8

Rgds,

AK

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: