Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Assign radius server to specific VPN 3000 groups

Last week, I assigned a test server Cisco ACS to act as the authentication and accounting device for a specific group on a Cisco VPN Concentrator 3060. When I looked at ACS, it appeared that not only the group was going there but others were passing through as well and using the defaults on the Cisco Secure ACS. Is there a way that I can ensure that only the traffic assigned to that specific VPN group will using the ACS server defined?

THank you

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Assign radius server to specific VPN 3000 groups

Hi ,

Not sure about your set up. But you need to set up group mapping so that only specific AD group can authentication.

In external db group mapping, map

ACS VPN group----->with<---- AD VPN group

All other combination should point to No access group.

Regards,

~JG

Do rate helpful posts

4 REPLIES

Re: Assign radius server to specific VPN 3000 groups

Hi ,

Not sure about your set up. But you need to set up group mapping so that only specific AD group can authentication.

In external db group mapping, map

ACS VPN group----->with<---- AD VPN group

All other combination should point to No access group.

Regards,

~JG

Do rate helpful posts

New Member

Re: Assign radius server to specific VPN 3000 groups

JG,

I did have the group mapping, but while doing some testing with LDAP and ACS, I mapped two additional groups to prove that an upgrade was successful. I will set it back the All other combinations to no access group.

Let me test.

Dwane

New Member

Re: Assign radius server to specific VPN 3000 groups

JG,

If I put an authentication and authorization server at a single group level, then shouldn't that group be the only one who utilizes that server?

Thanks

DWane

Re: Assign radius server to specific VPN 3000 groups

Hi DWane,

Setting up single authen and author server in vpn3000 should work fine.

Regards,

~JG

152
Views
0
Helpful
4
Replies
CreatePlease login to create content