A customer of mine uses an application called webposition that queries search engines and returns results such as ranking. Their question was that if they had a block of public IP addresses... could we have an a PIX/ASA or another cisco appliance set a schedule to where the untrusted (WAN) interface could change it's public IP address every "x" amount of intervals such as once per week/day/etc.
I have no clue if this would be possible with an PIX 501 or ASA 5505. Any guidance would be greatly appreciated.
I figured the worst case scenario we could put the boxes running that application outside the firewall or in a DMZ and use netsh combined with a batch script to change the IP addresses.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...