Other Security Subjects

Hi,what´s the best practice to sync the configs in an vpn3000-cluster.thanksRonny

Hi all, We have a Cisco 1711 VPN router running IOS ver 12.3 on our remote site and have a tunnel created from our main location. We configured 3 interfaces on the 1711 to act as VLANS so we can route to 3 different networks at the remote site. Two o...

On PIX 515 I did translation for private to public address like static (inside,outside) 63.192.x.x 192.168.1.x netmask 255.255.255.255 0 0I can see from outside with the public address but the problem is from inside users can not see with the public ...

Hello all,I’m not having any problems with the Pix 515E I implemented a couple of weeks ago, but I do have a few questions regarding best practices. I have found that there are several different ways something can be configured to achieve the same re...

There is a packet loss between two zones.i.e FTP SERVER(zone1) is showing connection loss daily 5 to 7 times to DATABASE servers(zone2) in its log file. The n/w was good before implementation of zones and when all in the same subnet.Please post your ...

Hi,Please can someone clarify something for me:If I have a general identity NAT statement for a network e.g.static (inside,outside) 172.16.10.0 172.16.10.0 netmask 255.255.255.0Can I use the following static NAT statement with an access-list to NAT o...

Hi,i have an issue with a NAT configuration. The setup is that there is dynamic NAT using a pool of a single host that maps many users to a public IP. There is also a web server that has a static NAT mapping.The problem is that the customer is using ...

Hi thereHow can you forward events from the system Configuration on the FWSM to the admin context for syslogging in the event where the system does a failover, as there is no interfaces in the system configuration?

I'm using two 3030 concentrator with software 4.1.5, RRI and OSPF with my internal router. Sometimes, when the tunnel is up, the entry for a remote hw client with lan Extension is removed from router's routing table.How can I solve my problem without...

I configure my 1750 router with ADSL WAN card for internet and pix 515 firewall after router to protect my network. router just for dialup, and firewall configure with DHCP to my PC, but it doesnt work, hope anyone can help me:router:version 12.2serv...

Hey there, hope someone can help.We've a PIX 501 protecting our internal network. It's running PDM (not often used.)All working well at present.There's a new requirement to allow external users to access an internal web server on port 443, for a webm...

Hi,I want to upgrade the new IOS on the above router to the following: c7200-jk9s-mz.123-15.bin Min memory: 128MB (cisco recommend)Min Flash: 48MB (Cisco recommend)c3745-advipservicesk9-mz.123-15.binMin memory: 128MB (Cisco recommend)Min Flash: 32M...