hi, I have following configuration on the pix 515
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 test 75
nameif ethernet3 med security40
From med to test, we need set up the outside nat to nat the med's IP became one of the ip on test interface.
nat (med) 3 172.16.0.0 255.255.0.0 outside 0 0
global (test) 3 10.20.1.1
from inside to med there's no nat.
nat (inside) 0 0 0
when I set up the ouside nat, from inside interface I can not reach med interface any more. It showed "no translation group found..."
But from inside to med we already had nat (inside) 0 0 0 command.
Anybody can help?
Thx.
Yang