I booted a 7206 router and it booted in Rxboot mode. I wanted to boot from flash . so i gave the command config-register 0x2102 and rebooted the router. still i'm on rxboot mode. i gave sh version and it gave the config register setting as 0x2102. pl solve the issue.
better u change the config register to 0x102 then reboot if again it goes to Rxboot mode then switch off the router then again break then see the config register if it is the same that u have changed the config register then reboot. if prob comes pl reply
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...