Browser times out, VPN to ISP - PIX -DMZ - Web Server
Can anybody help,
We want the user to pick up company pages from our IIS server
A home user dials a ISP from home using a analogue modem. Then connects to our company web site. When a user clicks on the link 'Staff info' The ISP redirects the user to our PIX (Outside). The PIX is configured to authenticate users against ACE Radius. The PIX passes authentication to the Radius but before complete the authentication, the browser times out.
Any suggestions would be appreciated as this is becoming frustrating!
Re: Browser times out, VPN to ISP - PIX -DMZ - Web Server
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...