I have a customer that has a 1720 and has 2 subnets on thier FastEthernet port and only one is configured with an access list... Does anyone know a good resource for helping me configureit so that both subnets see each other fine and that both subnets are properly configured with the IOS firewall???
If you have just the two subnets, and they need to talk to one another and you have not implemented firewall features, then its as simple as a couple of ip route statements. Give TAC a shout if you need assistance with this.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...