i am testing my network performance by copy a file using tftp from workstation to server in the campus network. The first testing is to copy the file from local workstation (workstation at same network with Server) to server. The result that i get is 7.7 Mbps. The second testing is copy file from remote workstation (Remote workstation is a workstation which defference network with the Server)to Server. The workstation location is 4 hops network from the server. the result is 2.5 Mbps. we are running ATM Backbone in campus network. My question is, is my network a normal network speed or not ?, What do you think about my testing result ? and please advise me on this and provided my the support document.
RADIUS and Symantec VIP.
I will use screenshots of ASDM, and at the end I will add the required CLI commands. the diagram below show a diagram of the steps the FW goes through when using 2FA authentication:
As you can see in Fig. 1&nbs...
Unable to get signature update from cisco.com
1. Make sure the router can get name resolution. Configure the router with a proper DNS name server.
ISR4451#utd threat-inspection signature update server cisco username xxxxx password yyyyy