Can FWSM 's interface IP address be set as gateway to route traffic to MSFC
When I deploy the MSFC on the inside of FWSM,I can't ping the PC(192.168.100.100) on another MSFC subnet from inside subnet as I set the source pc's gateway with FWSM inside IP address(192.168.101.254). If the source pc's gateway is set with MSFC's inside IP address(192.168.101.253), it will be OK.
I wonder why.
(I have configured the " icmp permit any inside " and " access-list 100 permit ip any any ; access-group 100 in interface inside")
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...