Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can I reduce the memory on mp-bgp

Hi ,

On my PEs I would like to reduce the consomation of memory with mp-bgp .

I din't found any documents on this chapiter .

For an idea the PE is consomme like 13 or 14 Mbts and the PE have like 700 idbs configured on it .

If some one have an idea I will be happy .

Thanks.

Coumar.

sat.bet@caramail.com

2 REPLIES
Silver

Re: Can I reduce the memory on mp-bgp

Here are a few things that you could try to reduce the memory consumption and also the CPU utilization. Enable "ip tcp path-mtu-discovery" on all routers. This will help with convergence and scalability. Hence CPU will be less utilized.

- If you have multiple peer-groups configured that have the same outbound policy, it's better if you put these peers in the same peer-group.

-Also have a maximum of 25 PEs per peer-group.

Lastly ensure that you do not have a lot of debugs turned on.

New Member

Re: Can I reduce the memory on mp-bgp

Thanks a lot for the answer.

I have already enable the tcp path-mtu-discovery,selective-ack,mss 1516 and window-size 65535.

I don't have High CPU problem ,I have 17 percent for 5 min.

I have only single peer-group configured but I have 35 PEs un thispeer-group.

I don't have any debug turned on.

So you think it should be the 35 PEs in the same group can cause this consumption of memory ?

Thanks .

130
Views
0
Helpful
2
Replies
CreatePlease login to create content