09-25-2006 01:05 PM - edited 02-21-2020 01:11 AM
when I attempt to use the ADSM launcher from connecting to the outside interface of the ADSM my connection fails. I have configured the ASA to allow http connections from my IP address, are there any other steps I need to complete
Solved! Go to Solution.
09-25-2006 07:24 PM
Hi .. that is all you need
http server enable
http x.x.x.x 255.255.255.255 outside
where x.x.x.x is the public address that you are connecting from
Are you able to connect from inside your ASA ..?
I hope it helps .. please rate it it does !!!
09-25-2006 07:24 PM
Hi .. that is all you need
http server enable
http x.x.x.x 255.255.255.255 outside
where x.x.x.x is the public address that you are connecting from
Are you able to connect from inside your ASA ..?
I hope it helps .. please rate it it does !!!
09-27-2006 06:35 AM
I believe you can only SSH to an outside interface on a PIX/ASA. It does not matter what you have configured as far as TELNET or HTTP for access to an outside interface.
09-27-2006 08:34 PM
hi
(for the post of tech011@charming.com )
you can access the asa from an outside interface even with telnet but the requirement here traffic must be IPsec protected.
make sure that you configured
http server enable
http your-ip-address 255.255.255.255 outside
and make sure you are using the correct ip address in the asa that configured to allow http access, or just use the hostname of the asa when your trying to access it
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide