Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cannot access ASDM on ASA 5510

Dear All,

I had ASA 5510 and i tried to enable ASDM but it still cannot access..when i show run and sh flash it show as below:

1-sh run

asdm image disk0:/asdm-508.bin

2-sh fla

ASA-Mfone-HQ# sh fla

--#-- --length-- -----date/time------ path

75 8192 May 25 2009 11:53:22 log

80 8192 Mar 12 2009 06:31:48 crypto_archive

147 7562988 Oct 23 2009 10:56:56 asdm-613.bin

149 14137344 May 25 2009 11:48:14 asa804-k8.bin

150 2153936 May 26 2009 10:57:06 anyconnect-win-2.2.0133-k9.pkg

the version on Disk0 and flash not the same, and i try to delete and upload again but it still the problem,

could you let me know how can i do?

Best Regards,

3 REPLIES

Re: cannot access ASDM on ASA 5510

Did you enable asdm and permit access to it?

Eg,

http server enable

http 0.0.0.0 0.0.0.0 Inside

If you want you can allow specific IP.

Regards,

~JG

Do rate helpful posts

New Member

Re: cannot access ASDM on ASA 5510

Hi

The ASDM statement needs to point to the ASDM image on the flash:

Could you remove the statement in the configuration.

ASA(config)# no asdm image disk0:/asdm-508.bin

Then add the following:

ASA(config)#asdm image disk0:/asdm-613.bin

Could you also make sure you have the following in the running configuration:

ASA(config)# show running-config | in http

http server enable

http ip_address subnet_mask interface_name

Regards MJ

New Member

Re: cannot access ASDM on ASA 5510

Dear MJ,

could i ask you some question that you showed below:

ASA(config)# no asdm image disk0:/asdm-508.bin

Then add the following:

ASA(config)#asdm image disk0:/asdm-613.bin

The command as below, what are different between command :

- Internet-ASA#

Internet-ASA# copy tftp fla

Address or name of remote host [10.2.2.3]?

Source filename [rnet-ASA(config)#]? asdm-613.bin

Destination filename [asdm-613.bin]?

Accessing tftp://10.2.2.3/asdm-613.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Best Regards,

HK

14374
Views
0
Helpful
3
Replies
CreatePlease to create content