I have mobile users using the Cisco VPN client (4.0.5B) connecting to an 837. They can connect and access the internal/remote network resources ok. However, they are unable to access to Internet at the same time. I also had this issue when some users were connecting into a PIX, but managed to sort that using the vpngroup <groupname> split-tunnel <acl> and appropriate ACL commands. All I can find on Cisco's site is that it is possible by specifying an ACL, bit I'm not sure where to specify this and what. Thanks.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...