cant browse or work with network behind vpn

[knamikhazehaqq]

I have Pix 525 as easy vpn server and pix 501 as hardware vpn client (

nem), I can succesifully establish vpn connection, but i can't browse or ping network on inside interface of pix 525

in atachments you can find my conf

[ajagadee]

The MVDPOOL defined for the VPN Client has a range of 172.18.1.150-172.18.1.200 and I dont see a NAT 0 Statement to by pass NAT. Also, did you want to configure 172.18.110.0/24 has the MVDPOOL, because your configurations are more tailored to allow everything to work when the VPN Clients get an ip address assigned from the 172.18.110.0/24 range.

Let me know how the test goes after making the changes to POOL or NAT 0 command.

Regards,

Arul

[knamikhazehaqq]

Thanks for reply ajaqadee

It's my first time when I'm doing vpn, I didn't understand everything

but I made new configuration, after vpn connection established I can ping from server site pc behind the remote hardware vpn client but from remote site i can't ping inside network of easy vpn server:(

in atachment You can find both configurations

pls write exactly what i have to do, with commands, what to add or what to change