Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cant run copy flash tftp on PIX 501

I have one PIX 501 whose configuration am trying to copy to TFTP before upgrading the activation key to allow for VPN-3DES, however, i find that i cant run

copy flash tftp

and the only available commands are "copy capture: <capture-name> tftp:"

How does the copy capture work, and can i use it to copy my config and/or flash to tftp ?

Mark

2 REPLIES
Hall of Fame Super Blue

Re: Cant run copy flash tftp on PIX 501

Hi Mark

From config mode try

write net 192.168.5.1:pixbackup.cfg

where 192.168.5.1 is the address of the tftp server and pixbackup.cfg is the name of the file you want to save.

HTH

Jon

Re: Cant run copy flash tftp on PIX 501

Mark, here is a link with instructions on how to for PIX/ASA.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008072142a.shtml#req

to back up config

"write net tftp_IP:pix-506-congig"

you can copy config to tftp and restore config from tftp to pix, but you cannot copy pix code to tftp, you can download new code from tftp to pix flash.. e.g " copy tftp flash"

HTH

Jorge

2288
Views
0
Helpful
2
Replies
CreatePlease to create content