07-11-2006 04:31 AM - edited 02-21-2020 01:02 AM
Hi,
Is it possible to capture pix's traffic 24/24 hours and tftp it automatically to a host ?
07-11-2006 06:18 AM
If you want some type of continuous traffic capture you should look at something like a distributed sniffer implementation. The PIX capture is mainly for troubleshooting purposes only.
Please rate any helpful posts
Thanks
Fred
07-11-2006 06:22 AM
Hello harinirina,
There really isn't a way to do this using the Pix alone. However, for limited troubleshooting you can do some packet capturing on the Pix. Again, this is a troubleshooting tool, not a packet collection tool.
Capture
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/c.htm#wp1053548
If you need all traffic, you'll need an external sniffer.
Hope this helps! If so, please rate.
Thanks
07-11-2006 07:14 AM
Thanks both for your quick reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide