03-25-2009 10:01 AM - edited 03-09-2019 10:09 PM
I have 2 CAS in HA. CAS01[Active] CAS02[Standby]. Both use Trusted-side Service IP Address and Untrusted-side Service IP Address.
I reach the Active CAS trough the Service IP and trough its real IP.
But i can not reach the Standby CAS trough its real IP neither ssh.
03-25-2009 11:34 AM
Is your workstation on any of the VLANs managed by the NAC Server. Can you SSH to it from the NAC Manager.
03-25-2009 11:50 AM
Yes mi workstation is into Vlan managed by NAC Server.
I can ssh to Stanby CAS trough the Active CAS.
03-25-2009 05:20 PM
If you can access from a vlan not managed by Cisco NAC, it is probably because of the standby NAC Server is not supposed to interact with clients on managed subnets.
Though I have no documentation to support that.
-Dan Laden
03-25-2009 11:13 PM
Could you check that Failover is really working?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide