Catalyst 4500 and 802.1X with per-user ACLs

[andre.frost]

Hi,

I tried to configure 802.1X with per-user ACLs on Catayst 4500. Authentication is working properly but ACL not become activ. I checked inacl syntax several time and see this AVPairs are given from RADIUS server to the switch. I can only find guides for Catalyst 29xx an 35xx switches that's why I am wondering if this is available for Catalyst 4500.

[dsweeny]

Following links may help you

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/20ew/configuration/guide/dot1x.html

http://www.cisco.com/en/US/docs/ios/12_2/security/command/reference/srfauthp.html

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/8.1/configuration/guide/8021x.html

[jafrazie]

Can you paste an example here of the ACL you're setting in the VSA for RADIUS?

Thanks,