12-30-2002 04:33 AM - edited 03-09-2019 01:31 AM
Hi all! Trying to configure CBAC on 2610 running IOS ver.12.2(2)T. My Cisco reseller insists my platform supports the Cisco IOS Firewall Feature set. However, whenever I issue the command ''show ip inspect all'' to verify the CBAC capability, the output shows that the CBAC is not supported (% Invalid input detected at '^' marker)! Any comment/help will be appreciated!
Thanks.
Joe P.
12-30-2002 05:54 AM
Hi Joe,
What we need to do is check the actualy image you are running with a "sh version" off the router.
You should have this image:
"c2600-io3-mz.122-2.T.bin".
Please post us the image name and we can take it from there.
R/Catherine
12-30-2002 07:11 AM
Dear Catherine,
The most relevant info from the 'sh ver ' output is as follows:
*system image file is 'flash:c2600-i-mz.122-2.T.bin'*IOS (tm) C2600 Software (C2600-I-M), Version 12.2(2)T, RELEASE SOFTWARE (fc1).
Should you need any other detail, kindly let me know.
Regards.
Joe P.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: