Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Certificate,

Hello,

I m facing issues with the licence as per my previous post,i want to regenerate SSL certificates. I have setup once at the time of fresh installtion i want to regenerate once more how can i do that????? i have to run again service perfigo config on both the Manager and Server???

Main Issues when CAS is not added in NAM as per CISCO

time difference

Answer: (time between the manager and server is only 2 sec difference)

SSL certificates issue


( i want to regenerate once more this is the only option for me)

connectivity configuration

( NAM and NAS are pinging to each other and they are accessible from the network,)

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Certificate,

Hi Estela,

To regenerate the certificates you can do this from the GUI of the CAM for the CAM cert:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_admin.html#wp1078189.

And from the GUI of the CAS for the CAS cert:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_admin.html#wp1040111.

However, please keep in mind that in order to be able to add the CAS to the CAM, you need valid CAS license installed on the CAM, time in synch, and depending on the version, you will also need to make the CAS trust the CAM cert and vice-versa.

This is all documented on the documents i ppointed out.

HTH,
Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

1 REPLY
Cisco Employee

Re: Certificate,

Hi Estela,

To regenerate the certificates you can do this from the GUI of the CAM for the CAM cert:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_admin.html#wp1078189.

And from the GUI of the CAS for the CAS cert:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_admin.html#wp1040111.

However, please keep in mind that in order to be able to add the CAS to the CAM, you need valid CAS license installed on the CAM, time in synch, and depending on the version, you will also need to make the CAS trust the CAM cert and vice-versa.

This is all documented on the documents i ppointed out.

HTH,
Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

169
Views
5
Helpful
1
Replies