chang vpn client ip from pix local pool ip to ACS_NT static IP
For more flexible design , i would like to chang vpn client ip from pix local ip pool to ACS_NT static ip , i delete " isakmp client configuration address-pool local ippool outside " and creat ip pool ranger 10.1.1.1-10.1.1.254 in ACS vpn client Group, but i still failed , Could anyone give me relation document
Re: chang vpn client ip from pix local pool ip to ACS_NT static
This is not supported at the moment, the pool of addresses has to be local to the PIX.
To allocate addresses from a remote pool would require Accounting functionality, otherwise the PIX and ACS server would never know when to free an address from the pool. Since VPN accounting is not supported, non-local address pools are also not supported.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...