12-22-2002 11:07 AM - edited 02-20-2020 10:27 PM
hi
i'm looking for the commands to change the mac address on the
ethernet 0 interface on a customers pix firewall.
Thanks for help
sh vers
Cisco PIX Firewall Version 6.1(1)
Hardware: PIX-506, 32 MB RAM, CPU Pentium 200 MHz
Flash i28F640J5 @ 0x300, 8MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
0: ethernet0: address is 0005.328f.c292
1: ethernet1: address is 0005.328f.c293
12-22-2002 11:32 AM
Hi,
You cannot change the mac address of an interface on the pix firewall.
Regards,
Arul
01-07-2003 03:20 PM
Dear Peter,
You cannot change whit the PIX 506, but whit a 515 or 515E failover and Sw 6.22 you can choose what MAC address you want to use
01-08-2003 01:04 AM
Thanks a lot to all who answered.
I bypassed that matter by changing the mac address entry at the cable provider.
greetings
peter
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: