I have got an request from a customer. In this scenario 3.6.4 Cisco VPN-Clients are connecting to a c1710 router running the new 12.2(15)T and using the XAuth authentication. When the userlogon appears, the user just have 30 seconds to key in the password and press OK. Because of a long cryptical password, the 30 seconds are not enough to key in all charracters of the password and the router disconnect due to a timeout with the message "Remote peer terminated connection". The customer asks now if it is possible to change this timeout to a longer time.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...