I have changed the local IP pool to another range on a PIX 6.0 and the VPN client when connecting still gets the old IP address. What needs to be cleared or how can I put a new IP range in place? I even tried a new VPNGROUP with thi new pool range and still the client connects with the old IP.
I did but no luck. Also, even with keeping the old IP address I connect but can't ping resources inside the 1800 router. Probably 2 different situations but any reason why I can connect but can't ping. I thought it might be def gw missing from the inside host but when I do a extended ping sourcing from the outside address it works. Also, if using an IP for my VPN client that is part of the inside subnet how does the router handle this? does it do a proxy arp on behalf of its VPN clients? thanks.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...