Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 806 VPN Probs w/Firewall IOS

Hi All,

I'm new to Cisco so a little help would be great.

I just purchased an Cisco 806 Broadband Router. I've added the Firewall/3Des IOS to this router.

Before the upgrade I was able to use the Cisco VPN client from a Windows PC to connect to my office.

After the IOS upgrade I can connect but can no longer receive packets after connecting.

If I go back to the IP IOS it all works fine... so I'm thinking it must be a rule or something...

Any Suggestions?

Thanks!

Stefan

4 REPLIES
Cisco Employee

Re: Cisco 806 VPN Probs w/Firewall IOS

Did you use the same versions of the IOS for the IOS F/W and IP IOS only? Also, any difference on the config when you put on the IOS F/W?

New Member

Re: Cisco 806 VPN Probs w/Firewall IOS

The FW IOS is a little newer 12.2(8).T. No config changes at all.

As soon as the FW IOS is loaded I can connect to my VPN... send packets, but I don't get anything back.

Stefan

New Member

Re: Cisco 806 VPN Probs w/Firewall IOS

Hello, I also have a 806 router but I am not able to connect to home office workstation. Can you please send me a copy of your config. Thanking you in advance for your help.

New Member

Re: Cisco 806 VPN Probs w/Firewall IOS

Howdy -

I am having the same problem with my 806 to PIX VPN. The tunnel comes up, but no traffic flows. I have done several 1710 and 1720 to PIX VPNs, but I can't get the 806 to come up...

Did you get an answer to your question?

197
Views
0
Helpful
4
Replies
CreatePlease login to create content