03-23-2002 05:01 PM - edited 02-21-2020 11:39 AM
Hi All,
I'm new to Cisco so a little help would be great.
I just purchased an Cisco 806 Broadband Router. I've added the Firewall/3Des IOS to this router.
Before the upgrade I was able to use the Cisco VPN client from a Windows PC to connect to my office.
After the IOS upgrade I can connect but can no longer receive packets after connecting.
If I go back to the IP IOS it all works fine... so I'm thinking it must be a rule or something...
Any Suggestions?
Thanks!
Stefan
03-23-2002 10:00 PM
Did you use the same versions of the IOS for the IOS F/W and IP IOS only? Also, any difference on the config when you put on the IOS F/W?
03-23-2002 10:12 PM
The FW IOS is a little newer 12.2(8).T. No config changes at all.
As soon as the FW IOS is loaded I can connect to my VPN... send packets, but I don't get anything back.
Stefan
08-31-2002 05:38 PM
Hello, I also have a 806 router but I am not able to connect to home office workstation. Can you please send me a copy of your config. Thanking you in advance for your help.
09-05-2002 12:12 PM
Howdy -
I am having the same problem with my 806 to PIX VPN. The tunnel comes up, but no traffic flows. I have done several 1710 and 1720 to PIX VPNs, but I can't get the 806 to come up...
Did you get an answer to your question?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide