Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
sre
New Member

cisco 827 to CIsco 827 vpn

Hello,

I am trying to setup a vpn between two 827's on an adsl line (3 later), I have

done vpn's on Netscreen's, but I am a bit lost with the Cisco(I know basic cisco stuff

show run / Conf t /Interfaces config)

Could somebody point me too some good doc?

Would the "easy vpn setup" be any use to me?

Thanks very much

James

2 REPLIES
New Member

Re: cisco 827 to CIsco 827 vpn

Take a look at IPSec topics in http://www.cisco.com/warp/public/707/index.shtml

Probably you are going to find there an environment close to yours.

You can try http://www.cisco.com/warp/public/707/index.shtml, too.

It's related to a 2600 router, but you can make some little changes to fit an 827

Good luck!

Cisco Employee

Re: cisco 827 to CIsco 827 vpn

You really want to do a lan to lan tunnel between the two routers, so the sample config below might help"

http://www.cisco.com/warp/customer/471/vpn_pppoe.html

It is between an 827 and a 2600, but the config for the other 827 would be similar to the first one anyway.

97
Views
0
Helpful
2
Replies
CreatePlease to create content