I have some strange vpn issues with a 877 router. The router is configured as a bridge as the DSL connection is layer 3 connection where the ISP has provided an IP address (no pppoe login etc as such). The router is setup and operational, the config is simply 3 port redirections (smtp, pop3 and rdp) to the inside network and nat from the inside to the outside. The issue I have is the vpn client connects and tunnel come up. You can ping anything on the network and DNS works from the Windows 2K server, you can connect via ssh, log in but then the connection is terminated!, I can telnet to port 22 and get the ssh header. I can not connect to any other port on the windows server or free bsd box - ie smtp, rdp or pop3.
The VPN connection is as per the Cisco doco on setting up a simple server client config using local username/password authenication. The VPN client is 4.8 and IOS is 12.4 ip security (I think from memory)
the bvi1 interface is the outside and also has the crypto bound to it as well, No acls on the bvi1 interface, but I have tried a two line acl which allowed access from the vpn network followed by an ip any any rule.
I have not got the config in operation but will post it as soon as I get it. Has any one seen a simular issue before? If so please sand me some pointer.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...