Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ACS deployment

Hi dears,

I have 2 physically Cisco ACS model. I want to deploy one of them is Primary and other one is secondary.

How i configurate this deployment??

must I be assign each ACS different ip adddress?? what about the license??

THANKS.

3 REPLIES
New Member

Cisco ACS deployment

I have only one PAK. I install the Primary ACS and register the PAK and get license. Then i install this license to the Primary ACS.All of them is good for Primary ACS.  Now i want to start configurate the Secondary one. BUT i confuse the license issue.

Do i need a license for secondary ACS?

Thanks.

Hall of Fame Super Silver

Re: Cisco ACS deployment

Yes, the secondary server needs its own license. The reference here tells us:

A secondary ACS server receives all the system configurations from the primary server, except that you need to configure the following on each secondary server:

License—Install a unique base license for each of the ACS secondary servers in the deployment.

Cisco Employee

Re: Cisco ACS deployment

It seems you're deploying ACS 5.x. Once you have license installed on the seconday ACS server. Here are the steps to register the secondary box to the primary.

Register a secondary node to the primary instance.

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-4/user/guide/acsuserguide/admin_operations.html#wp1056068

Let us know if you need any further assistance on this.

~BR
Jatin Katyal

**Do rate helpful posts**

~BR Jatin Katyal **Do rate helpful posts**
332
Views
0
Helpful
3
Replies
CreatePlease login to create content