Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cisco asa ips module

Hi dears

we buy 2 cisco ASA 5555-x with IPS module. when i write show module in each ASA.

ASA1:

Mod Card Type                                    Model              Serial No.

--- -------------------------------------------- ------------------ -----------

  0 ASA 5555-X with SW, 8 GE Data, 1 GE Mgmt     ASA5555            FCH1727J1VD

ips ASA 5555-X IPS Security Services Processor   ASA5555-IPS        FCH1727J1VD

Mod MAC Address Range                 Hw Version   Fw Version   Sw Version

--- --------------------------------- ------------ ------------ ---------------

  0 7c69.f68f.6bdc to 7c69.f68f.6be5  1.0          2.1(9)8      8.6(1)2

ips 7c69.f68f.6bda to 7c69.f68f.6bda  N/A          N/A          7.1(4)E4

Mod SSM Application Name           Status           SSM Application Version

--- ------------------------------ ---------------- --------------------------

ips IPS                            Up               7.1(4)E4

Mod Status             Data Plane Status     Compatibility

--- ------------------ --------------------- -------------

  0 Up Sys             Not Applicable

ips Up                 Up

Mod License Name   License Status  Time Remaining

--- -------------- --------------- ---------------

ips IPS Module     Enabled         perpetual

ASA2:

ciscoasa# show module

Mod  Card Type                                    Model              Serial No.

---- -------------------------------------------- ------------------ -----------

   0 ASA 5555-X with SW, 8 GE Data, 1 GE Mgmt     ASA5555            FCH1729J7Z5

ips Unknown                                      N/A                FCH1729J7Z5

cxsc Unknown                                      N/A                FCH1729J7Z5

Mod  MAC Address Range                 Hw Version   Fw Version   Sw Version

---- --------------------------------- ------------ ------------ ---------------

   0 c08c.6015.26c2 to c08c.6015.26cb  1.0          2.1(9)8      9.1(1)

ips c08c.6015.26c0 to c08c.6015.26c0  N/A          N/A

cxsc c08c.6015.26c0 to c08c.6015.26c0  N/A          N/A

Mod  SSM Application Name           Status           SSM Application Version

---- ------------------------------ ---------------- --------------------------

ips Unknown                        No Image Present Not Applicable

Mod  Status             Data Plane Status     Compatibility

---- ------------------ --------------------- -------------

   0 Up Sys             Not Applicable

ips Unresponsive       Not Applicable

cxsc Unresponsive       Not Applicable

Mod  License Name   License Status  Time Remaining

---- -------------- --------------- ---------------

ips IPS Module     Disabled        perpetual

what is a problem in second ASA IPS? is this physical problem on IPS?

Thanks.

3 REPLIES
Hall of Fame Super Silver

cisco asa ips module

Double check your order. If the second unit was indeed purchased with IPS, it has a hardware problem and you should contact the TAC for an RMA.

It appears to have the SSD for CX module but is not imaged to support that.

Community Member

cisco asa ips module

Marvin, could it also be that the liscence for the second 5555 is not setup for IPS?  i see the License is set as "Disabled"  which leads me to believe that it may not have a proper key. 

Hall of Fame Super Silver

cisco asa ips module

I'm not positive but I think the license status "disabled" is s secondary effect. The card type "unknown" would be more troubling to me.

I'd open a TAC case on it if you've verified the order included IPS.

1300
Views
0
Helpful
3
Replies
CreatePlease to create content