Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Firewall (CIC) on VPN Client using VPN Concentrator

I am having problems using this CIC feature.

The firewall rules which I configured on the Concentrator are exported to the Client !

If I start a PING or TELNET the counters on"Pakets encrypted" start to increase - but it seems that no traffic is sent back ( "Pakets decrypted" remain "0" )

BUT if I deactivate the CIC Firewall Feature packets are routed in successfully - so it should NOT be a routing problem !

Does anyone have experience with this feature ?

Thx a lot

Hans

1 REPLY

Re: Cisco Firewall (CIC) on VPN Client using VPN Concentrator

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

320
Views
0
Helpful
1
Replies
CreatePlease login to create content