We have a new 3845 router that will be installed in our main HQ office to terminate over 100 Site-to-site VPNs and accepting different dial-in from remote users both using Cisco VPN Client and MS VPN client.
So, here are the problems we are experiencing.:
1. The Cisco VPN client users can connect with local authentication and Ok to access resources behind the Cisco router. However, they won't get authenticated thru our Radius server (Active directory)once enabled. Any ideas?
2. The MS VPN client users will connect and get authenticated thru RADIUS server, and able to access resources but won't access the internet locally. Any ideas?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...