I can't get VLAN detection to work when no users are logged onto the machine. When I run a network trace with a user logged on, I can see that the gateway is being sent an ICMP ping every 5 seconds as per the settings in my .xml config file. However, we I log the user out and run the trace, the pings are no longer being sent. The following tag is supposed to enabled this feature:
I require this feature in my environment as we regularly have situations where a machine is up and at 'CTRL+ALT+DELETE' when it is kicked back into the untrusted network. When this happens, depending on DHCP lease times, the machine can be left in limbo with and incorrect IPCONFIG as it hasn’t detected the network change.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...