We recently set up a PIX (with Passive FTP mode enabled) which allow
1) Outgoing from Internal to External for http,https, dns,ftp, smtp
2) Incoming from External to Internal for
smtp, ftp , dns and POP3. We host a mail server
and ftp server for public access.
All the services run fine except for ftp with following problems:
1) When client from Internal Network trying to access External FTP sites, they can login but when execute command such as ls to browse the folder/file the system just hang. Have tried may public FTP sites and the result is always the same.
2) When client from External Network try to access hosted FTP server in our network, the same problem occur, can login but cannot do any transfer and see any folder.
We have tried using different FTP clients and setup 2 different FTP servers but problem still the same.
In fact, we allowed both ftp port 20 and 21 for both outgoing and incoming.
As mentioned only FTP is affected, all the rest of firewall function work without any problem.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...