Cisco PIX 515E multiple ISP support in a VPN scenario
Iam currently running a cisco 7.2 ios in a Cisco PIX 515E appliance. I have terminated two ISP links in the two ports, and I also have a inside network (LAN). I want to establish 2 Site-Site VPN tunnels using each one of these ISP links respectively (Site 1 in ISP link 1 && Site 2 in ISP link 2).
Re: Cisco PIX 515E multiple ISP support in a VPN scenario
This should work. Route the remote endpoint for site 1 out link 1 (using a static route) and for site 2 out link 2 (using a static route) and that should do it.
Return traffic should work, assuming both ISPs aren't advertising the networks your interfaces are on via BGP (ie, you don't want return traffic from site one coming down the link to site 2 because that ISP is advertising that AS as well.)
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...