03-29-2004 08:13 PM - edited 02-21-2020 01:05 PM
Hi, Guys,,,
I am currently trying to find anyone who has set up the cisco router
building site to site vpn with other small VPN box (linksys or dlink...etc)..
could anyone give me some advice ?
Best Regards,,
stan
04-02-2004 12:02 PM
Linksys routers support IPSec connections only on firmware versions 1.34 or later (1.39 is the latest version). The IPSec pass through should be enabled on the Linksys router.
04-02-2004 04:28 PM
I did some testing (that where working) with Netopia routers (R910) but the throuput was no really good; as soon we were using des or 3des , the speed was dropping terribly and the cpu use of the netopia router was always almost at 100%. we were already using those netopia box as "cheap" lan to lan solution but with pptp and mppe encryption and I have to admin they're performing well in this setup.
But our testings convinced us to get back to 831 or 1710 Cisco's for our more "serious" design.
hope it'll help you...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide