We will possibly be attaining a Cisco Secure ACS 2.4 for installation on an NT server. The current solution that we have is just a bank of modems at the back on the NT server. We are hoping to change this by installing the ACS on the NT server and getting RAS users to dial into a PRI in a 3640. In the 3640 will be some mica modems for laptop and home modem users. My question is, does anyone know of any known problems when implementing ppp callback between a 3640 and a home modem user when an ACS (2.4) is installed on an NT server.
Any advice will be appreciated as callback is important to us.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...