Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Secure ACS 4.0 Solution engine problem

Hi,

I have a probleme with a Cisco Secure ACS 4.0 Solution Engine (CSACSE-1113-K9).

I try to power up the engine, but the light in the power button stay blinking all the time. Anyone have a idea why ?

Last week, I boot it for the first time (It's brand new), every things goes fine.

I made " shutdown " then wait the message to press 4 seconds power button to turn it off. This morning, nothing come up.

I see one thing in the console "Press <SpaceBar> to update BIOS." after that, blank. No bios detection, no harddrive dectection, no windows boot.

Any idea ?

Thank you

2 REPLIES
Cisco Employee

Re: Cisco Secure ACS 4.0 Solution engine problem

Hi.

Are you sure you're not talking about #8 as shown in this diagram:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/csapp32/install/ovrvuap.htm#wp1026107

Which just is used for unit identification??

New Member

Re: Cisco Secure ACS 4.0 Solution engine problem

No, I'm sur.

Then we have version 1113 of ACS.

See: http://www.cisco.com/application/pdf/en/us/guest/products/ps6731/c2001/ccmigration_09186a008068f7bd.pdf

Page 32(1-8) #2.

I let the engine off about 6hours after my first post, then I try back. The engine start.

What can cause this problem ?

258
Views
5
Helpful
2
Replies