Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Security device manager (SDM) authentication fails

when i tried to install SDM on cisco2611 router it is asking for username & password of level 15 so configured a local user of level 15 on the router & provided the same creditentials to SDM installer but the authentications fails can any body pls clarify wht to do in this situation

regards & thanks in advance

3 REPLIES
New Member

Re: Cisco Security device manager (SDM) authentication fails

A couple of things I've experienced installing SDM.

Make sure you don't have a firewall running on the PC attempting to install SDM from.

Set "line vty 0 15" to "login local" after you've set a userID and password.

Set "IP HTTP AUTH LOCAL".

Hall of Fame Super Gold

Re: Cisco Security device manager (SDM) authentication fails

I believe that SDM typically sets privilege level 15 on the vty. You might try that and see if it helps.

HTH

Rick

New Member

Re: Cisco Security device manager (SDM) authentication fails

hi jeff,

there is no firewall in between or running on PC

and i tried your recomendationd but it did not work out.

is it any thing with the version of IOS, BTW i am using c2600-is-mz.12.2-34

regrds & Thanks in adv

160
Views
0
Helpful
3
Replies
CreatePlease to create content