Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco Security Manager Perfomance Monitor 3.2.1 generate strange message

This message generate periodicly:

____________________

FaultId: 27

DeviceId: 450

DeviceIP: 172.23.29.5

DeviceName: 172.23.29.5

MO: Device

Change: Device is not accessible via HTTPS - Either the credentials are incorrect or Https may not be enabled on the device

ChangeSeverity: P1

StateChange: Device Accessible via Https is Down

AlarmState: Active

OverallSeverity: P1

DeviceType: Firewall

____________________________

But device still accessebel by HTTPS. I see there are no timeout configure by HTTP access (only SNMP timeout).

PS. Device successuful import to PM. And I recive a messages from this device.

1 REPLY
Bronze

Re: Cisco Security Manager Perfomance Monitor 3.2.1 generate str

MCP uses HTTPS for periodic polling to Firewall, the interval may vary

depends on the default polling interval ( default 5min ) and the size of the network.If you think this unreachable event is due to netowork cogestion or intermittent problems.

Then you can use the following steps:

1. Admin->Events->Firewall

2. Select "Device Accessible" , click 'Thresholds'.

114
Views
0
Helpful
1
Replies
CreatePlease to create content