Re: Cisco VPN client 4.0.3.c and a 3Com PC soft phone
If you are using Cisco's IP softphone then the softPhone should be set to send the VPN adaptor IP address instead of the interface IP address to the CCM. However I am not sure if the same applies to the 3Com softphone as well.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...