Cisco VPN Client 4.02 to 2 Pixes (6.3) at the same time
A customer needs to access two Cisco PIX 515e through IPSec VPN at the same time. I provided him the Cisco VPN Client 4.0.2 and did the appropriate configurations. All is working - sadly the VPN client can not access both VPN's simultaneously.
Is there another client that can?
Checkpoints SecureRemote (VPN Client SW) allowed this for quite some time so I wonder why Cisco VPN Client 4.0.2 doesn't?!
Re: Cisco VPN Client 4.02 to 2 Pixes (6.3) at the same time
With the Cisco VPN client you can't have two connections open at once, no way around it.
The old CiscoSecure VPN client used to allow you to do this. You would now have to purchase this off the company that wrote it originally here (www.safenet-inc.com) since the CiscoSecure version doesn't run on 2K/XP. Then configure the PIX using this:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...