Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

cisco vpn client and pix 501

I wonder....and wonder, is it possible for a branch office (2 vpn clients) to connect to the central location(cisco pix 501) at the same time via vpn client with one public address on each sides. If not what will be the way to make it work without additional equipment (another cisco pix).

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: cisco vpn client and pix 501

yes you can, you must ensure your pix has os 6.3 and you enable nat-transapency:-

isakmp nat-traversal 20

2 REPLIES
New Member

Re: cisco vpn client and pix 501

yes you can, you must ensure your pix has os 6.3 and you enable nat-transapency:-

isakmp nat-traversal 20

New Member

Re: cisco vpn client and pix 501

thanks, you solved my problem

79
Views
0
Helpful
2
Replies
CreatePlease to create content