User is running Cisco VPN Client 4.0. They are behind a PIX 515E 6.1(4), and I need to connect to a VPN concentrator that is outside of our network. We use PAT for address translation. As far as I can tell, to allow 1 ipsec tunnel through the firewall, I need to upgrade the pix to 6.3 and enable 'fixup protocol esp-ike'
Is there another way to do this? I'm also curious how much easier/better this would work if we were dealing with pptp.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...